Button Set Double Bubble - Unique job-size, one-shot packages for Maintenance, Repair & Production Button Set
Button Set Sanford has Adhesives in easy to use tubes to large bulk containers Button Set   Button Set EPOWELD golf adhesives are the choice of professionals Button Set Sanford Distributing supplies epoxy and urethane materials in a full range of containers and in dual barrel cartridges Button Set

 

 
 

High performance, two part electrical potting and encapsulating compounds with excellent dielectric properties, void penetration and superior heat resistance. Used for casting insulators, housings and terminal blocks.

 High performance epoxy structural adhesives for manufacture and repair of sports equipment, striking and other tools, filters, grinding wheels hubs and more.

 

EPOWELD golf adhesives are the choice of professionals whether manufacturing golf clubs, selling wholesale golf components or running a pro shop with repair capabilities.

Formulated with a unique combination of high technology epoxy resins that result in excellent shear, peel and pull-out strength. It offers unsurpassed torque resistance whether bonding steel, graphite, wood or composites.

 
Applicator guns with static mixers and Dual-Barrel cartridges are perfect for fast applications. Cartridges with pre-measured, two-part epoxies are ideal for bonding, assembly, sealing, maintenance, repair, splicing, joining, mold-making, filling, bolt-anchoring and setting.

Also good for crack injection, structural adhesive dispensing, battery fabrication, potting and encapsulating, tacking, and much more.

 Sanford Distributing Co., Inc. 109-D Mid South Drive, West End, NC 27376 • Phone # (910) 295-3810 & Fax # (910) 295-4540

Hardman Double / Bubble ® 2-part Epoxy, Urethane and Silicone adhesives

Sanford is Master Distributor Double Bubble Epoxy, Urethanes, Silicone by Hardman Inc. Hardman Double Bubble one-shot, single service packages are perfect on the Job-Size repair with Epoxy, Urethane and Silicone adhesive. Hardman Double / Bubble Urethane and Epoxy are strong, 2-part adhesive in both rigid and flexible formulations that contain no solvents that resist tearing, abrasion wear & scratching. Hardman Double Bubble Epoxy will not shrink and will cure at room temperature.

Hardman Double Bubble Epoxy is effective over a wide range of temperatures for bonding to metal, glass, wood, concrete and most hard plastics. Hardman Double Bubble Epoxy is a cost efficient adhesive. Hardman Double Bubble Epoxy is usually more economical than mechanical fasteners and they do not induce galvanic erosion. The Hardman Double Bubble Variety Pak lets you assemble any combination of Hardman Double Bubble Epoxy, Urethane, Silicone by Hardman in a carton containing 25, 50 or 100 packages and mixing sticks. Hardman Double Bubble Single service packets are available in Epoxy, Urethane and Silicone adhesive. See our Selector Guide to find the best product for your application. Lowest delivered price Hardman Epoxy Urethane Silicone

Hardman High performance Bulk Potting & Encapsulating

Hardman two part electrical potting and encapsulating compounds with excellent dielectric properties, void penetration and superior heat resistance. Used for casting insulators, housings and terminal blocks. Hardman High performance epoxy structural adhesives for manufacture and repair of sports equipment, striking and other tools, filters, grinding wheels hubs and more.

EPOCAP ® – Potting & Encapsulating Compound

Two part electrical potting and encapsulating compounds that provide excellent dielectric properties and penetration of voids with superior heat resistance. In addition to their excellent potting and encapsulating properties, these compounds are widely used for casting insulators, housings and terminal blocks.

KALEX ® – Potting & Encapsulating Compound

Two component Potting & Encapsulating, polyurethane electrical grade component. They display an excellent combination of shear strength & peel strength, with good impact resistance. Highly recommended for casting insulators, housings and terminal blocks.

EPOWELD golf adhesives are the choice of professionals whether manufacturing golf clubs, selling wholesale golf components or running a pro shop with repair capabilities. Our industry proven EPOWELD high-performance golf adhesives have been the adhesive standard in the golf for over 50 years. Formulated with a unique combination of high technology epoxy resins that result in excellent shear, peel and pull-out strength, they offer unsurpassed torque resistance whether used for bonding steel, graphite, wood or composite materials.

Golf Adhesive, Golf Production & Golf Repair Compounds

Epoweld 8173

Epoweld 8173 was developed in the late 1960’s to exceed the performance of other 5 minute setting Golf Repair adhesives. Unlike other Compounds, Epoweld 8173 is formulated with several epoxy resins to achieve a “through cure” to enhance that combination of shear strength, peel strength, pull out strength, torque resistance and a degree of flexibility that is required in Golf Repair and high technology adhesives. To compare Epoweld 8173 with any other 5 minute setting adhesive, mix a small sample of each epoxy and separately spread them on thin pieces of cardboard. Allow them to set overnight and then bend the cardboard. You will notice how much tougher the Epoweld 8173 sample feels as well as how much less brittle it is.

Epoweld 8200

Epoweld 8200 was formulated in the late 1960’s to give the user the versatility to use one adhesive for many different jobs. Prior to the development of graphite shafts for golf clubs, polycarbonate resins were used as inserts in wood drivers and fairway woods. Standard epoxies were not as successful in bonding to these resins as required by club manufacturers...thus the development of Epoweld 8200. Since that time, manufacturers have found that, when using Epoweld 8200 as the overnight cure epoxy, exceptional shear strength, peel strength, pull out strength and torque resistance are achieved when bonding all components whether steel, wood, graphite or composite materials.

Pigment Pastes

Safety Red and Black Pigment Pastes mix into clear, white or off-white epoxy to tint and blend the adhesive bond line to match the substrate color. The pastes eliminate the need for two or more systems when a black or red version of the base system is desired. Both pigment pastes are epoxy based, do not contain solvents and are easy to blend into the base epoxy compound.
 

Hardman High performance Bulk Structural Adhesive

EPOWELD ® – Structural Repair Adhesive

Hardman epoxy structural adhesives for the manufacture and repair of sports equipment, striking and other tools, filters, grinding wheel hubs and lots more. They display good combinations of high and low temperature performance, thermal conductivity, flame retardancy, shock, torque, impact and chemical resistance.

KALEX ® – Structural Adhesive

Two–component, fast setting polyurethane adhesive systems. They display an excellent combination of shear strength and peel strength, with good impact resistance. They are highly recommended for bonding engineering thermoplastics, SMC, laminated surfaces and repair of reaction injection molded parts.

Hardman 2-part Epoxy, Urethane and Silicone adhesive double Dual-Barrel Cartridges

Sanford Distributing carries a full line of dual-barrel cartridges. Sizes available for equal volume systems are: 50 ml (1.5 ounces), 150 ml (5+ ounces), 300 ml (10+ ounces), 600 ml (20+ ounces) and 1500 ml (50+ ounces). Also available is a 50 ml cartridge for 2:1 or 1:2 systems. Static mixers, which affix to the cartridges, are available in a variety of lengths and mixer sizes. Applicator guns are also available for either manual or pneumatic processing. These dual-barrel cartridge systems provide fast, easy dispensing of pre-measured two-part systems with applications ranging from bonding to sealing to crack injection to potting and encapsulating.

Hardman 2-part Epoxy, Urethane and Silicone adhesive Applicator Guns

Applicator guns with static mixers and Dual-Barrel cartridges are perfect for fast applications. Cartridges with pre-measured, two-part epoxy is ideal for bonding, assembly, sealing, maintenance, repair, splicing, joining, mold-making, filling, bolt-anchoring and setting. Also good for crack injection, structural adhesive dispensing, battery fabrication, potting and encapsulating, tacking, and much more. Sanford Distributing, epoxy, double bubble, epoxy, urethane, silicone, kalex, epocap, golf club bonding, electrical, fast setting, non sag, epoweld.

Sanford the Epoxy Source distributor of Hardman Epoxy Double Bubble and Bulk Adhesive