Button Set Double Bubble - Unique job-size, one-shot packages for Maintenance, Repair & Production Button Set
Button Set Sanford has Adhesives in easy to use tubes to large bulk containers Button Set   Button Set Sanfords Golf products Button Set Sanford Distributing supplies epoxy and urethane materials in a full range of containers and in dual barrel cartridges Button Set

The industry standard for more than 40 years, for on-the-spot repairs, installations, assembly and a lot more.
 

Dual-Barrel Cartridges, Applicator Guns & Mixing Tips
 

Sanford Distributing carries a full line of dual-barrel cartridges. Sizes available for equal volume systems are: 50 ml (1.5 ounces), 300 ml (10+ ounces), 600 ml (20+ ounces) and 1500 ml (50+ ounces). Also available is a 50 ml cartridge for 2:1 or 1:2 systems. Static mixers, which affix to the cartridges, are available in a variety of lengths and mixer sizes. Applicator guns are also available for either manual or pneumatic processing. These dual-barrel cartridge systems provide fast, easy dispensing of pre-measured two-part systems with applications ranging from bonding to sealing to crack injection to potting and encapsulating.

EASY-TO-USE:

  1. Remove cap from cartridge tip
     
  2. Install mixing tip
     
  3. Place cartridge in applicator gun
     
  4. Depress gun trigger for perfectly mixed and measured adhesive
     
  5. Place cap on tip for storage
     
  6. Cartridges can also be used with meter mix dispensing equipment

Dual-Barrel Cartridges
& Mixing Tips
Dual-Barrel Cartridges & Mixing Tips

Typical Uses: Bonding, assembly, sealing, maintenance and repair, splicing, joining, mold making, filling, bolt anchoring and setting, snowboard and ski manufacturing and repair, crack injection, structural adhesive dispensing, battery fabrication, potting and encapsulating, tacking, and more. 50, 300 & 600 ml Cartridges.
 

DUAL BARREL CARTRIDGE SIZES AVAILABLE

Each Barrel Size = Total Volume Per Cartridge
Side A + Side B (2 per Cartridge)

50ml x 50ml = 100ml (3+ oz. mixed material)
300ml x 300ml =600ml (20+ oz. mixed material)
600ml x 600ml =1,500ml (40+ oz. mixed material)


Model PPA-150HP
Pneumatic

Model PPA-150HP

Description: PPA-150HP

• Dedicated Mix Ratio (Must Specify)
  150ml x 150ml. (1:1 Mix Ratio)
  150ml x 75ml. (2:1 Mix Ratio)
• Nominal Thrust 484lbs
• True Adjustable Air Regulator – 100 PSI Maximum
• Instant Dump Valve
• Support Strap - Secure Cartridge Fit
• Reverse Air - Plunger Return with Trigger
• All Component Replaceable Parts
• Air Hose Connector Included

Typical Uses:
Our applicator guns and cartridges simplify the  mixing  and dispensing of two-part electrical grade systems and structural adhesives. They're ideal for bonding, assembly, sealing, battery fabrication, potting and encapsulating, tacking, & more.


Model PPM-150


Model PPA-150

Description: PPM-150

• Multiple Ratio Conversions
150ml x 150ml. (Preconfigured Arrangement)
150ml x 75ml. (Kit Included)
• Mechanical Advantage 18:1
• Support Strap – Secure Cartridge Fit
• Wear Compensating Device
• Patented Catch Plate (Sintered Steel)
• Low–High Viscosity Materials
• All Component Replaceable Parts

Typical Uses: Our applicator guns and cartridges simplify the  mixing  and dispensing of two-part electrical grade systems and structural adhesives. They're ideal for bonding, assembly, sealing, battery fabrication, potting and encapsulating, tacking, & more.

For pricing and orders contact Sanford

See Cartridges

Model CBM-24_94
Applicator Gun

Model CBM-24_94

Description: CBM-24_94
 

  • 25ml x 25ml.
  • Dedicated Mix Ratio 1:1
  • Mechanical Advantage 11:1
  • Easy Loading Breech – Secure Fit
  • Full Cartridge Support

Typical Uses: Our applicator guns and cartridges simplify the  mixing  and dispensing of two-part electrical grade systems and structural adhesives. They're ideal for bonding, assembly, sealing, battery fabrication, potting and encapsulating, tacking, & more.

For pricing and orders contact Sanford

See Cartridges

One-shot, Job-Size Double/Bubble Packages

MR50
Applicator Gun


Description: The MR50

The MR50 is a small, lightweight, hand-held manual gun which dispenses 2-component adhesives through dual-barrel cartridges and mixing tips. Many 2-component adhesives are available from Sanford in dual-barrel cartridges.


Typical Uses:
Our applicator guns and cartridges simplify the  mixing  and dispensing of two-part electrical grade systems and structural adhesives. They're ideal for bonding, assembly, sealing, battery fabrication, potting and encapsulating, tacking, & more.

For pricing and orders contact Sanford

See Cartridges

  One-shot, Job-Size Double/Bubble Packages


One-shot, Job-Size Double/Bubble Packages

Home • Double Bubble • Bulk Adhesives • Golf Products • Guns / Cartridges • NSN  8040-00-092-2816 • On-line Orders • MSDS • Contact Us

ฉ 2007 -2021 All Rights Reserved Sanford Distributing mark@theepoxysource.com

Webmaster: Demetrios Sales Co